Wood Moisture Detector Wood / Paper / Cardboard / Wall Construction Material Water Content Detector.
The device is an electrical conductivity hygrometer designed to measure moisture in most wood, bamboo, paper, cardboard, cement walls, gypsum or dry walls. This device also test the current ambient temperature.
WARRANTY: 6 MONTHSIMPORTANT: Calibration certificate not included
Check Moisture Content in Paper, Dry Walls or Timer, Stocks Available in Sri Lanka
There are 4 types of wood in timber mode A, B, C, D, which allows you to measurealmost all typeof wood accurately. It also has a paper model for testing water in cardboard, cartons and paper, and a wall model for testing thin slates, panels or other building materials.
KEY FEATURES:
2 pin digital water content meter, used to measure water in most wood, bamboo, paper, cardboard, walls, etc.
Large 1.7 inch screen, clear numbers showing measured water, ambient temperature and wood type indicators.
Choose 4 types of wood: About 50timber types for you to choose, enabling you to measure the water of all kinds of wood accurately.
Environmental thermometer: 2 units of temperature can be used (C and(f) measurement of ambient temperature.
Data retention function: you can lock in measurements to facilitate water inspection and recording, which is very useful.
Low power consumption and automatic shut-off: only 2 1.5 v aa batteries (excluding) will automatically turn off power supply within 5 minutes if no power saving operation is carried out.
Timberreference list:A: teak, walnuts, pyrethroids, rubber trees, inbuja, kokrodua, niobica bala, corkB: kruger, poplar, beech, cedar, toraC: laoan, waxwood, elm, fir, maple, red, oak, cherry woodD: b wood, deciduous pine, pine, birch
TECHNICAL DETAILS:
Model: ZN-MT02Material: absScreen: lcd display with green backlightPrinciple: resistance3 modes: wooden, paper, wallPaper pattern: cardboard, carton, paperWall pattern: slate, wallboard, floorTimber range: 4,75 per centPaper scope: 4,90 per centWall range: 0.2,24 per centResolution: 0.1%Accuracy: 0.5 per centElectrode length: 10mm (0.4)Electrode pin: integrationAuto-power off: 5 minutesWorking temperature: 0,40C (32 104)F)Measuring temperature:-20 70CPower supply: 2x1.5v aaa battery (excluding)Product size: 144x64 x 31mm/5.67x2.52x1.22 inProduct weight: 108 g/3.84 ouncesPacking weight: 137 g/4.84 ouncesPackaging size: 15.3x8.5x4cm/6.02x3.35x1.57 inches
Packing list: 1 x ZN-MT02 Cardboard, timer & Wall Moisture Meter (hygrometer)1 x manual (English)
